HDU foam monument sign
This type of monument is raised with metal letters. These letters are lightweight and durable for the exterior of the monument. The letters are set up with a solid EPS foam core and then they are secured with a thick polyurethane coat. This coat makes it impermeable to rot, termites, and moisture. The reason we use an acrylic texture is to give it resistance against fading, impact, and the weather.
Fabricated aluminum monument sign
These monument signs are made out of a fabricated box. This box is usually 6-10” deep and can be painted to the colors desired. The lettering can be raised cut metal and illuminated of reversed-cut out of the box and illuminated with LED’s. This type of sign will need to be established in a concrete pad.
Cut metal letters for signs
Our cut letter options are metals including aluminum, stainless steel, Cor-Ten steel, copper, brass and bronze. Therefore they are also a lifetime guarantee. Our stainless steel letters also are great if you’re looking for greater depth in the letters. All of these options can be installed on your stone, or masonry monument or entrance wall.
Back-lit stainless steel letters
You can create a dramatic halo lighting effect with LED back-lit letters installed on your monument sign wall. We place high-quality, low-voltage LED modules inside the channel letters and give a lexan backer. During installation, the letters are floated off the wall with spacers. The results are breathtaking, both indoors and outside.
Installation is simple
Our company pre-assembles all the letters on the sign for you. Installing the sign is very simple with just two holes to dig and two posts to set. If you choose a lighted monument sign, you’ll need an electrical junction at the sign location.